Jonas Ådahl [Mon, 14 Dec 2020 14:11:37 +0000 (15:11 +0100)]
screenshot: Grab screenshot during paint on X11
We might not be able to directly paint the stage to an offscreen, if
there currently is a fullscreen unredirected window. To make it possible
to take a screenshot in this situation, disable unredirecting, queue a
frame, and take a screenshot after having painted that frame, before we
go back being unredirected.
With ClutterBlurNode available, we can remove our own implementation
and delegate the blur shader and framebuffers. This simply replaces
the pair of layer nodes (vblur and hblur) with a ClutterBlurNode,
and removes all dead code.
dash: Allow icon sizes equal to the available space
When checking for a suitable icon size, Dash currently checks which
of the hardcoded icon sizes is smaller than the calculated available
size.
On some circumstances, however, when the calculated available size
is exactly equal to the hardcoded icon sizes, Dash selects a smaller
size. This cascades (the next icon size is exactly the smaller size,
etc) and ends up with always Dash selecting smallest size available,
even with plenty of available space.
Check if the calculated available size is smaller or equal to the
hardcoded icon sizes.
Florian Müllner [Fri, 11 Dec 2020 13:30:05 +0000 (14:30 +0100)]
ci: Improve checkout script output
We are currently not very good at communicating what's going in,
in particular for non-merge request pipelines where the output
is usually just "Using origin/master instead" (instead of what?).
Improve this by consistently communicate what we are looking for,
whether we found it, and what we end up doing.
Port the blur effect to the new ClutterEffect.paint_node() vfunc.
Update the function names to match what they do, e.g. "apply_blur()"
now creates the blur subtree and thus was appropriately renamed to
"create_blur_nodes()".
There are 3 subtrees that can be generated by the blur effect:
Jonas Ådahl [Wed, 9 Dec 2020 18:32:01 +0000 (19:32 +0100)]
workspacesView: Don't update scroll position when allocating
Updating scroll position may have significant side effects, e.g.
switching workspace; this should never happen during allocation, as
we're in the middle of painting a frame. So, put it in an idle callback
if we're doing it from an allocation to have the side effects happen the
right time.
Jonas Ådahl [Wed, 9 Dec 2020 18:02:55 +0000 (19:02 +0100)]
st/viewport: Don't trigger relayout when picking
Calling clutter_actor_get_allocation_box() might still implicitly
trigger a full relayout, which has many side effects not expected to
occur during picking. Avoid a particular case which caused a reentry
issue by using the current allocation instead of forcing a relayout when
picking in StViewport.
Clarify comments on ConditionEnvironment placement
Clarify the comments on ConditionEnvironment= by mentioning that a
ConditionEnvironment= line must be located in the [Unit] section.
The comments suggesting using ConditionEnvironment= themselves are
in the [Service] section, which implicitly and wrongly suggests
that ConditionEnvironment= could be defined right there as well.
Correct the systemd version required for ConditionEnvironment=
According to systemd's NEWS file, the ConditionEnvironment= setting
has only been introduced in systemd 246, not in 245 like the comment
in the services files claimed.
Florian Müllner [Fri, 4 Dec 2020 19:40:13 +0000 (20:40 +0100)]
dbusServices/screensaver: Split out public ScreenSaver service
Commit 799bbdb50 split out the public Fdo notification service, so
that any app with permission to talk to org.freedesktop.Notifications
will in fact be limited to that service.
To a somewhat lesser extent this applies to the org.gnome.ScreenSaver
service as well, which some applications still use instead of the
Inhibit portal.
Florian Müllner [Mon, 7 Dec 2020 14:24:37 +0000 (15:24 +0100)]
workspace: Lower maximum window preview size again
In commit 1218e68 we allowed full-sized window previews under the
assumption that we had enough other clues (like the vignette effect)
to differentiate the overview from the regular session.
That didn't hold up in testing, so make the maximum preview size
slightly smaller again.
Florian Müllner [Sun, 6 Dec 2020 05:00:10 +0000 (06:00 +0100)]
magnifier: Stop exposing D-Bus interface
Screen magnification is the compositor's business, not that of "random"
unprivileged tools. And for cases where a more specialised behavior is
wanted, an extension likely does a better job than a consumer of the
D-Bus API.
In addition to that, exporting the interface has been broken for an
unknown time, because the object that holds the implementation isn't
referenced and thus ends up being garbage collected, whoops.
And last but not least, this gets rid of the last public D-Bus name
that isn't clearly in the system namespace (org.gnome.Shell,
org.gnome.Mutter, org.gtk).
Florian Müllner [Fri, 4 Dec 2020 21:02:55 +0000 (22:02 +0100)]
main: Stop owning the org.gnome.Panel name
This is a relict from the pre-3.0 days, when it was common to
replace a running GNOME 2 session with gnome-shell. There has
been no good reason to claim the name for many years, time to
drop it.
If someone really wants to run gnome-panel alongside the shell,
they probably know what they are doing. Or cannot be helped anyway.
Simplify the opacity dance to simply setting it to the initial value
before animating (0 when animating in, and 255 when animating out),
and to the final value after the spring animation is done (vice-versa).
iconGrid/iconGrid: Wait for icon sizes before running spring animation
To run the spring animation, IconGrid uses the transformed position and size
of the icons. This works okay when IconGridLayout doesn't need to update the
icon sizes, but looks bad when IconGridLayout selects a different icon size.
Wait for the icon sizes to be recalculated, and the icons beallocated, before
running the spring animation. If no icon size update is pending, run the spring
animation directly.
appDisplay/baseAppView: Update page indicators on page-changed
The number of pages doesn't depend on the allocated size anymore. Move updating
page indicators from BaseAppView.adaptToSize() to a IconGrid::pages-changed
callback.
appDisplay/baseAppView: Use a separate flag for animated indicators
In the future, both AppDisplay and FolderView will be horizontal, and thus
using the orientation to determine whether to use animated indicators won't
be enough.
Use a different flag to control that, and make FolderView not use animated
page indicators.
appDisplay: Properly destroy SwipeTracker on destroy
SwipeTracker connects to signals of the stage, but doesn't disconnect on
destroy, leaving them hanging and potentially running callbacks for
destroyed objects.
This is visible when removing a folder by dragging all icons out, and
running the swipe gestures, which will produce a bunch of warnings.
Explicitly destroy, remove, and disconnect the swipe tracker.
Make it subclass ClutterActor, since we don't need any of StWidget's
features. Pass the source actor of the bind constraint in the
constructor, and remove the extra method to set the source actor.
ControlsLayout is a tiny layout manager whose only purpose
is emit "allocation-changed" after allocation. This signal
was listened to update the workspaces actual geometry.
However, since d66cd0d2067a, ControlsManager doesn't listen
to this signal anymore, rendering the class useless.
Florian Müllner [Wed, 12 Aug 2020 18:59:01 +0000 (20:59 +0200)]
cleanup: Use optional chaining and ?? operator
Those operators have been supported since gjs switched to mozjs78
last cycle. While not ground-breaking, using it makes for a nice
cleanup here and there.
Daniel van Vugt [Wed, 19 Aug 2020 11:22:51 +0000 (19:22 +0800)]
st-theme-node-drawing: Render all shadow sections with thickness > 0
In some styles the top or left sections of box-shadows would go missing
even though they had non-zero thickness. This was because the inner
local coordinates could become very slightly negative and were then
incorrectly judged to be invisible.
Negative coordinates should not be ignored because that's where the
entire top/left sections of shadow are meant to exist. It's only the
sections of shadow with zero thickness that we should skip.
Florian Müllner [Thu, 22 Oct 2020 18:11:14 +0000 (20:11 +0200)]
messageTray: Default to generic policy
How and if notifications are shown is controlled by NotificationPolicy
objects. But ever since 098bd45, only notification daemon sources or
notifications associated with an app are hooked up to GSettings.
The hardcoded default policy for built-in notifications (including
those provided by extensions) arguably made sense back then, but
now that the main setting has been rebranded as "Do Not Disturb"
and is exposed prominently in the calendar drop-down, following
GSettings is a better default.
iconGrid/iconGridLayout: Make sure to always update best size
When selecting the best icon size for the available area, we
iterate from the biggest icon size to the smallest one, and
stop when finding a size that fits the available area.
However, the 'bestSize' variable is only updated when the
available area is positive. This is problematic in super bad
cases like when none of the icon sizes actually fit the availabe
area, which was hit with a previous iteration of this branch.
Make sure to update the best size while iterating, so that the
smallest size is selected even in such bad cases.
Use the Clutter.ActorAlign.FILL alignment by default, which
expands the grid until max-row|column-spacing is hit. This
was the behavior we originally wanted for the icon grid, and
it's finally being realized.
Add support for setting the page padding of the icon grid
through CSS. Unfortunately, each side needs to be specificied
manually, since it's not a regular padding property.
iconGrid/iconGridLayout: Add support for page-padding
This is a new property to control the padding around each page,
as opposed to the padding around the entire container.
Following the original design of IconGridLayout [1], changing
the page-padding property doesn't trigger relayouts; the container
is responsible for queueing a relayout appropriately.
Daniel van Vugt [Tue, 24 Nov 2020 09:34:08 +0000 (17:34 +0800)]
st-bin: Disallow st_bin_set_child with already-parented children
Not checking for this would result in `clutter_actor_add_child`
failing, but StBin keeping a copy in `priv->child`. So later on,
`st_bin_remove` would never be called on it and this assertion
would fail and crash the whole shell:
appDisplay: Don't update multiline for search results
The grid icons in the search results page doesn't expand to
acommodate the multiline label, resulting in the multiline
label to overflow behind the list search results. However,
after 548d3b62d, it was possible to trigger this behavior
with keyboard focus.
Jonas Dreßler [Sat, 24 Oct 2020 18:25:49 +0000 (20:25 +0200)]
Make sure to allocate all children in allocate vfuncs
Clutter expects actors overriding the allocate vfunc to allocate all
mapped children of the actor, otherwise bad things happen.
So make sure we actually allocate all our visible children in our custom
allocation functions, and since we don't want to give them a real
allocation, just pass them an empty ClutterActorBox.
It would be nice if we had a way to hide children during the allocation
process where no relayout is queued like gtk allows with
gtk_widget_set_child_visible(), then we could avoid those weird empty
ClutterActorBoxes.
Jonas Dreßler [Sat, 24 Oct 2020 20:24:35 +0000 (22:24 +0200)]
windowManager: Check whether metaWindow is NULL after destroy animation
When logging out or terminating gnome-shell, mutter will unmanage all
open windows, triggering the window-close animation in gnome-shell and
very quickly after that emitting "kill-window-effects". That means we'll
call _destroyWindowDone() to cleanup our animation data, but at this
point the MetaWindow of the window is already gone, so we get an error
that get_meta_window() returns NULL.
Fix that by checking whether get_meta_window() returned NULL and if it
did, don't access the window.
Jordan Petridis [Fri, 20 Nov 2020 13:54:13 +0000 (14:54 +0100)]
ci: Replace only/except with rules
only/except keywords where deperecated in favor of rules.
Since we started using GNOME/gnome-shell!1492 it introduced
a second pipeline being run for each commit.
Detached pipelines are the only way to access CI_MERGE_REQUEST_*
variables, and if we disable normal pipelines you will need to
create wip/spam MRs in order to run the tests.
This reworked rules makes it so, the normal pipeline needs manual
interaction to be started, and the detached/MR pipleines is always
run.
Jonas Ådahl [Fri, 20 Nov 2020 16:34:11 +0000 (17:34 +0100)]
ci: Generate junit report if project doesn't enable the registry
The image registry must be enabled for the CI to work, as the container
image from the upstream registry is placed (as a reference, more or
less) in the local registry.
Recently, ci-templates got a bit more helpful if this happened, and will
fail up front and generate a JUnit report with a message describing the
issue.
Jonas Ådahl [Fri, 20 Nov 2020 10:32:12 +0000 (11:32 +0100)]
ci: Bump ci-templates to include registry path fix
ci-templates had a bug where it failed to find the ready-built container
images on the upstream repository due to invalid assumptions about the
relationship between upstream repository and image registry. This
resulted in the container image to be rebuilt, wasting valuable CPU
cycles and storage space. Bump the included ci-templates template to
include the fix for this.
See https://gitlab.freedesktop.org/freedesktop/ci-templates/-/issues/22.
Jonas Ådahl [Fri, 6 Nov 2020 17:59:19 +0000 (18:59 +0100)]
ci: Use ci-templates for building image
This rebuilds the automaticaly whenever the image tag changes. Whenever
something in the image needs to change, alter the installation script
and change the tag to the current date.
This removes the -s (strict) argument from js68, as it doesn't exist in
js78.
Jonas Ådahl [Fri, 6 Nov 2020 17:07:07 +0000 (18:07 +0100)]
ci: Wait for 'check-commit-log' before continuing
The check-commit-log is quick, and to get a result early is helpful as
one can then more quickly check for failures via the report provided via
the JUnit report.
Jonas Ådahl [Fri, 6 Nov 2020 16:59:28 +0000 (17:59 +0100)]
ci/check-commit-log: Reverse the merge request URL check
Instead of making sure there is a reference to a bug or merge request,
make sure there isn't. The reason for this is that marge-bot will always
append a merge request URL in the end of the commit message.
Florian Müllner [Mon, 9 Nov 2020 19:24:34 +0000 (20:24 +0100)]
ci: Enforce non-legacy style for new code
We have been transitioning to the new coding style for a while now,
and there has been reasonable progress. So hopefully it is not too
intrusive at this point to enforce non-legacy style for all lines
that are changed in a merge request. If it turns out to be still too
annoying, we can always reconsider and turn off the additional job.
Florian Müllner [Sat, 7 Nov 2020 06:11:09 +0000 (07:11 +0100)]
ci: Use node-js script for running eslint
This is unnecessary hard in shell when compared to a proper programming
language. It becomes even easier with a node-js script, as that gives us
access to the underlying ESLint module rather than just the CLI interface.
Besides that, node-js has the added benefit that we don't need to add
more dependencies to the CI image.
If the adapt to size occurs after the grid page has been changed the
page is set to zero. This patch just keep the current page with the same
value that it has before.
appDisplay: Only show add/remove favorite when shouldShowApp() is true
`shouldShowApp()` is called in `_addFavorite`, so adding a favorite when
this isn't true won't work. Also, it seems when this is false, favorites
that do exist won't be shown anyway.
Carlos Garnacho [Wed, 28 Oct 2020 19:29:55 +0000 (20:29 +0100)]
magnifier: Avoid cursor visibility changes on startup
When initializing the shell, we create the magnifier, and (normally)
let it disabled. This still toggles cursor visibility on, which is
not right since there's other considerations to take during
initialization.
Only do this after actual changes to the magnifier state, so
initialization is left unperturbed.
It turns out, StViewport's pick implementation was broken, since
Clutter stopped reading clipping from the framebuffer. Rejoice with
bugfixing by removing code!
Jonas Dreßler [Sat, 24 Oct 2020 18:51:56 +0000 (20:51 +0200)]
windowPreview: Handle case where window already is part of layout
We sometimes add dialogs multiple times to the WindowPreview, for
example for modal dialogs we receive both the "window-added" and the
"window-entered-monitor" signal, which means we call
WindowPreview.addDialog() twice.
We handle that fine already in the WindowPreviewLayout and return NULL
in case the window already was added, so simply handle that NULL return
value and bail out of WindowPreview.addDialog() in this case.
Harry Míchal [Sat, 24 Oct 2020 15:07:10 +0000 (15:07 +0000)]
mpris: Switch text in title and body
Most media players have a media player that shows the title of a song
and artists in the song. In those media players the title is
highlighted (bold text) and the list of artists is under the title.
Shell does the exact opposite in the player in the notification area.
Example media players: Spotify, Rhythmbox, GNOME Music
Jonas Dreßler [Fri, 23 Oct 2020 20:05:13 +0000 (22:05 +0200)]
tests/background-size: Remove ClutterActor::paint signal handler usage
The background-size interactive test includes a test-case which uses the
ClutterActor::paint signal to hijack the painting of the actor. We're
removing that signal from Clutter, so remove that signal handler and
paint the outer border unconditionally to mark the boundaries of the
widget (the outer border actually never worked to force the cairo/cogl
path). To fix the test, change it to not paint a border on the inner
container in the useCairo=false case, which should make sure the cogl
path gets used.
Also remove the useless useCairo argument from addTestLine().
appDisplay: Let icon labels be multiline when hovered
When hovered, remove constraints from the icon labels that
limit the number of lines. Do that inside a saved easing
state so that the allocation can ease the label.
projects / gnome-shell.git / log